Skip to content

ΣΙΔ – ΜΕΤΑΛ ΑΤΤΙΚΗΣ

Head Office: 210 2777138

Warehouse: 210 2833990

Polyurethane Tile Panels

Polyurethane Tile Panels

Polyurethane Tile Panels

The self-supporting thermal insulation panels with Roman tile configuration with metal sheets on both sides and a core of polyurethane PUR or high index polyurethane (high index) PIR can be used as covering of ceilings and pitched roofs in all types of buildings.

They are distinguished by:
  • excellent reaction to fire, class B s1 d0 (PIR high index)
  • excellent thermal insulation capacity, U value
  • very good bearing capacity as a ceiling panel
  • they do not contain dangerous substances, CFC & HCFC free
They are produced with:
  • useful width 1000mm and nominal thickness average minimum thickness 40mm, average maximum thickness 90mm
  • in customized lengths from 1.75m to 14m with a step of 350mm, depending on the needs of the project

Insulating polyurethane core PUR/PIR

The 40 kg/m3 high density PUR polyurethane foam insulating core has excellent resistance to heat transmission. It is proven to be the best thermal insulation material in the field of construction.

It does not contain dangerous harmful substances, it is odorless and safe for health and the environment. Does not contain CFC & HCFC, substances that damage the ozone. It is recyclable and can be used to produce secondary use products

In addition, PIR polyurethane foam is not flammable, it is suitable for buildings with fire resistance requirements of their structural elements. The PIR polyurethane foam panel is classified in category B-s1-d0, according to the EN 13501-1 standard, i.e. it does not transmit fire, is difficult to ignite, has minimal smoke production and does not produce flammable or non-flammable particles.

 

Essential features:
  • Density 40 ± 2 kg/m3 (high index)
  • Thermal conductivity, λ 0.023 W/mK
  • 95% closed cell structure
  • Reaction to fire, self-extinguishing, class B s1 d0

 

Sheets

Pre-painted and galvanized steel sheets with a thickness of 0.35 to 0.50 mm are usually used. It is possible to choose a sheet of different materials and thicknesses.

  • Pre-painted and galvanized steel or with aluzinc protection, according to EN 10346 & EN 10143, from 0.35 mm to 1.0 mm, with Polyester, Plastisol, PVDF coatings.
  • Aluminum, unpainted with aluzinc protection or pre-painted with AluZinc protection, according to EN 508-2, with a thickness from 0.35 mm to 1.0 mm.
  • Stainless steel, AISI 304 2B or AISI 316 L, from 0.35 mm to 1.0 mm, without color coating, mat or gloss.

 

Outer Sheet

External metal sheets with Roman tile configuration, with the possibility of embossing the surface (Embossed) and without imprinting (smooth). In case the sheets used are embossed, the robustness of the panel increases.

 

Inner Sheet

Internal metal sheets with no flat configuration (Flat) or with a slight Box 100 groove configuration (50-50) and embossed (Embossed). It is possible to produce panels where the inner lamina can be replaced with a flat polyester sheet up to 1mm thick, for use in constructions where the environment is extremely corrosive.

 

Please ask us about available coatings (Polyester, Plastisol, PVDF, Food Safe, Non-Toxic and Anti-mould) and available colors (RAL1014 to RAL 9010)