Fence Posts

Fence Posts

 
Stands (on request)

From our company you can get fence posts made of corner or pipe.(on request)

Angled piles can be galvanized or hot-dip galvanized after drilling, in heights of 1.00m-1.20m-1.50m-2.00m-3.00m. It is possible to cut them with a chamfer (nose) at the lower end for easier placement on the ground. Also, there is the possibility that the upper end ends in a “V” shape or in an inclined one for the placement of concertina and barbed wire. The angles we usually use are: 30/30/3 – 35/35/3 – 40/40/3 – 50/50/5 – 60/60/6.

The pipe stakes are made of pre-galvanized sheet, 1.50mm or 2.00mm thick, and cross section Φ33 (1”) – Φ42 (1 ¼”) – Φ48 (1 ½”) – Φ60 (2”) . They are available in heights of 1.00m-1.20m-1.50m-2.00m-2.50-3.00m. There is also the possibility that the upper end ends in a “U” shape or in a slope for the placement of concertina and barbed wire.

Struts (to order)

The struts can be either from a corner, or from a pipe, at heights of 1.50m-2.00m, depending on the height of the fence. In the case of the pipe strut, it can be supplied forged at the upper end with one hole.

We also have plastic and metal plugs for all kinds of pipes as well as special fittings for connecting the pipes together (TAF-JOINT, etc.)